• Alloys
• Galvanised Iron
• Wrought Iron
• Ferrous Metals
• Steel
• Stainless Steel
• Aluminium
• Non-Ferrous Metals

Preparation:  All alloys, Zincalume®, galvanised iron, stainless steel and non-ferrous metals like aluminium should be primed with etch primer.  Surface should be clean, dry and free from contaminants such as rust, oil, grease and dirt.  Shake can for at least 1 minute after the mixing ball begins to rattle.  Shake the can occasionally during use.

Application: Hold can upright and spray, adjusting the nozzle to achieve the desired spray pattern.  When finished spraying, clear the spray valve by holding the can upside down and spraying until only gas escapes.

Handy Tip: When finish spraying, clear the spray valve by holding the can upside down and spraying until only gas escapes.  Clean up wet paint with Mineral Turpentine or Dy-Mark Xylene.